Electrically Operated Partitions

Excel 743-E

Standard Features

● Electrically-operated continuously-hinged movable partition.
● Driven by #35 roller chain.
● STC 43, 48, 50, or 54.
● Steel faces laminated to gypsum board.
● 102 mm [4″] nominal thickness. 1230 mm [48 1/2″] maximum width.
● Trimless vertical edges.
● Final closure by lateral wall jamb.
● Type FA horizontal seals : – Fixed top sweeps – Automatic retractable bottom seals set as panels are deployed – bottom seals provide a 50 mm [2″] floor clearance
● Odd-numbered panels supported by one 4-wheeled carrier with steel tires over hardened steel ball bearing wheels.
● Vinyl wallcovering. Upgraded wallcoverings : fabric, vertically-ribbed carpet, or full-height marker board.
● Maximum height: 3733 mm [12’-3″] Maximum length: 19810 mm [65’-0″]
● 1.5 hp / 120 V / 1 ph / 60 Hz
● Travel controlled by limit switches.
● Operation by two simultanuously-activated key switches located on each side of the partition.

Signature 843-E

Standard Features

● Electrically-operated continuously-hinged movable partition.
● Driven by #35 roller chain.
● STC 43 or 47 with gypsum board faces.
● STC 49 or 52 with steel faces laminated to gypsum board.
● 102 mm [4″] nominal thickness. 1230 mm [48 1/2″] maximum width.
● Clear-anodized steel-reinforced aluminum frame.
● Protective trims on entire perimeter.
● Final closure by lateral wall jamb.
● Type FF horizontal seals : – Fixed top and bottom sweeps – bottom seals provide a 50 mm [2″] floor clearance
● 1.5 hp / 120 V / 1 ph / 60 Hz
● Maximum height: 6780 mm [22’-3″] Maximum length: 19810 mm [65’-0″]
● Sandard Vinyl wallcovering
● Upgraded wallcoverings: fabric, vertically-ribbed carpet, plastic laminate, full-height marker board, wood veneer, COM.
● Travel controlled by limit switches.
● Operation by two simultanuously-activated key switches located on each side of the partition.

Signature 843-EP

Standard Features

● Electrically-operated continuously-hinged movable partition.
● Driven with Ø5 mm [3/16″] steel cable.
● STC 43 or 47 with gypsum board faces.
● STC 49, 52 or 55 with steel faces laminated to gypsum board.
● 102 mm [4″] nominal thickness. 1230 mm [48 1/2″] maximum width.
● Protective trims on entire perimeter.
● Final closure by pneumatically-operated telescopic mechanism.
● Type FP horizontal seals : – Fixed top sweeps – Pneumatically-operated bottom seals – bottom seals provide a 50 mm [2″] floor clearance
● Each panel supported by one 4-wheeled carrier with steel tires over hardened steel ball bearing wheels.
● Vinyl wallcovering. Upgraded wallcoverings: fabric, vertically-ribbed carpet, plastic laminate, full-height marker board, wood veneer, COM
● Maximum height: 6780 mm [22’-3″] Maximum length: 24385 mm [80’-0″]
● 1.5 hp / 120 V / 1 ph / 60 Hz drive unit
● 0.5 hp / 110 V / 40 dB CSA listed compressor (existing building air line system may be used, 115 psi MIN)
● Travel controlled by limit switches.
● Operation by two simultanuously-activated key switches located on each side of the partition
● STC 49, 52 or 55 with gypsum board faces and steel backing.